Solar Street Light Installation Occasion Evaluation


Photovoltaic street lights mainly rely on sunlight to provide working energy, and environmental assessment must be conducted before installation and design.
1. Sunshine time: greater than 2000H

2. Ambient temperature: minus 20℃--65℃

3. Surrounding environment:
a. Check whether there are trees, buildings, etc. on both sides of the installation section (mainly on the south side or east and west sides) to block the lighting. If there are trees or buildings blocking the lighting that may affect the lighting, measure their height and distance from the installation site, and calculate whether they affect the lighting of the solar cell modules; the general requirement for solar lighting is that solar lighting can at least ensure that there is no blocking that affects the lighting between 9:00 am and 3:00 pm.

b. Observe whether there are cables, wires or other facilities that affect the installation of the solar lamps above the installation location (note: it is strictly forbidden to install solar lamps under high-voltage lines);

c. Understand whether there are cables, optical cables, pipelines or other facilities that affect the construction of the solar street lamp foundation and battery compartment underground, and whether there are signs prohibiting construction. Try to avoid the above facilities during installation. If it is really impossible to avoid them, please contact the relevant departments and negotiate and agree before construction.

d. Avoid installing in low-lying areas, areas with soft soil or areas prone to water accumulation;

e. Take photos of the installation site on site;

f. Measure parameters such as the width, length, height and distance of obstacles on the road section, record the road direction and provide it together with photos and other data to the scheme designer for reference.

hashtag#solarstreetlight hashtag#solaroffgridsystem hashtag#newenergy #szskylin.com